Aluminum 2 1/2" NH Rocker Lug Cap Pick One Side_1 1/2 inch This hose is constructed of

This hose is constructed of an EPDM synthetic rubber tube and a double layer of 100% polyester woven jackets

Attaches to hydrant end of hose and need not be removed when charging the line

USDA Forestry Service fire hose reducer feature aluminum coupling with a 600 psi test pressure

The back flush flap will open to aid in releasing debris

Disruption of flow is minimal

Aluminum 2 1/2" NH Rocker Lug Cap Pick One Side_1 1/2 inch This hose is constructed ofAluminum adapters are fabricated from seamless extruded 6061 T6 aluminum and hard coat anodized per MIL A 8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. Gasket installed.